CM62-EZS-II-BK

CM62-EZS-II-BK
Find a Reseller
In stock

SoundTube 6" 2-way In Ceiling Speaker in Black with a Short Can

SoundTube CM62-EZs-II Coaxial In-Ceiling Speaker in Black

The next generation version of the CM62-EZs with improved and additional features. Engineered for applications with limited plenum space, incorporating a SoundTube-specific shallow backcan with an installed depth of only 3.5 inches. One 6.50 in (165.0 mm) treated fiber woofer with cloth surround and one 1.00 in (25.4 mm) silk dome tweeter. Easy-access six-position tap switch for 25/70.7/100-volt and 16 ohm transformer bypass position allows for easy ordering, stocking and installation. Reduced amplification costs with maximum efficiency including 90.5 dB sensitivity and 16 ohm impedance. Superior voice intelligibility with a 10 kHz coverage angle of 80 (independently verified). Cost-effective 16 ohm settings allows for the use of multiples of two, four, or six speakers in a system using a standard amplifier without a trans former. Incorporates a painted steel grille for lasting durability. Ceramic input terminal accepts up to 10 gauge plenum rated signal wire and includes thermal fuse. Suitable for use in voice alarm applications subject to EU regulations EN60849 and BS5839-8. EN54-24 listed. Adaptable to material thicknesses ranging from 0.04 inch (0.9 mm) 1.60 inch (40.6 mm). UL 1480 (UEAY) and 2043, cUL, CE (EMC Directive 89/366/EEC, EN55020, EN55013) approved. IP-Rating: IPX3.

Included accessories: Choose between a tile bridge or a pre-construction bracket, UL-listed 0.5-inch flex conduit clamp, paint shield and two wire nuts.

Owner's Manual | Tech Sheet | A&E Specs | GLL | EASE 4.0 | EASE 3.0 | CLF1 | CLF2 | DWG | DXF | PDF Drawing | EN54 Certification | UL Certificate



About SoundTube
More Information
ColorBlack
UPC752830442481
ManufacturerSoundTube
Manufacturer's CategoryCM-EZ Economical In-Ceiling
Shipping Weight9.15 lbs / 4.15 kg
Carton Height6.25 in / 158.75 mm
Carton Length13 in / 330.2 mm
Carton Width13 in / 330.2 mm
CertificationsCE, EN54, RoHS, UL1480A, UL2043
Enclosure PropertiesABS Glass Fiber Reinforced, Injection Molded, Sealed
Enclosure Volume350 cu in / 5735.47 cu cm
Included AccessoriesConduit Clamp, Cover Plate, Grille, Paint Mask, Choose Between a Tile Bridge or Pre-Construction Bracket
Optional AccessoriesBlack Grille (GRL-CM6/8EZ-II-BK)|Tile Bridge (AC-CMEZ6/8-TB)|Pre-Construction Bracket (AC-CMEZ6/8-PCB)|Junction Box (AC-CM-EZ-JBOX)
Source Inputs4 Pin Ceramic Terminal
IP RatingIPX3
TAA Compliant (Trade America)No
BAA Compliant (Made in USA)No
Backcan Diameter9.67 in / 245.6 mm
Backcan Height3.25 in / 82.5 mm
Coverage Angle (±6dB @ 2kHz) 140°
Crossover Frequency4.0 kHz
Cutout Width/Diameter10.5 in / 266.7 mm
Directivity Factor (Q) (Averaged 100Hz - 10kHz, @ 2kHz)5.1 and 5
Directivity Index (DI) dB (Averaged 100Hz - 10kHz, @ 2kHz)6.2dB and 7.0dB
Frequency Response (± 10 dB)75 Hz - 22 kHz
Frequency Response (± 3 dB)135 Hz - 20 kHz
Grille PropertiesBlack, Standard-Flange, Friction-Fit, Paintable, Painted, Steel
Low Frequency Voice Coil1 in / 25.4 mm
Low Pass Crossover12 dB per octave 2nd order
Max. Ceiling Thickness1.6 in / 40.6 mm
Max. Continuous Power RMS50W
Max. Program Power100 W
Minimum Impedance (Ω Ohms)17.9 Ω
Minimum Ceiling Thickness0.04 in / 0.9 mm
Network Type: High Pass6 dB per octave 1st order
Nominal Impedance (Ω Ohms)16 Ω
Tweeter Driver1" Silk Dome
Woofer Driver6.5" Treated Fiber Cone w/ Cloth Surround
Sensitivity dB @ 1W/1M90 dB
Sensitivity dB @ 2.83V/1M87.5 dB
Tap SelectorRotary Switch
Transformer Options25 / 70.7 / 100 V, 16 Ohm direct
Transformer Taps Max. Setting (25V/70.7V/100V)4W/32W/32W
Visible Diameter11.75 in / 298.5 mm
Visible Height0.34 in / 8.6 mm
Copyright © MS Electronics. All rights reserved.