XT-SPYKE

XT-SPYKE

The SoundTube XT-Spyke is not a typical line array column loudspeaker. It is an advanced LAPS (Line Array-Point Source) 2-way design that provides a very short near-field extent and robust far-field performance. Frequency tapering of low and high frequency pass bands allows the XTSpyke to maintain a more consistent ratio of array height to radiated wavelength, ensuring a stable vertical beamwidth that out-performs many other single box line arrays. Featuring eight 3.0-inch woofers and eight 1-inch high frequency drivers for extremely smooth high frequency response, the XT-Spyke achieves superb coverage in an enclosure measuring only 37.37” x 6.80” x 5.50”.

Specifications: XT-SPYKEMounting hardware included
Nominal Impedance8 ohm
Sensitivity dB @ 2.83V/1M92.0 dB
Sensitivity dB @ 1W/1M (2)92.0dB
Frequency Response (± 3 dB)85 Hz - 20 kHz
Frequency Response (±10 dB)65 Hz - 22 kHz
Max. Program Power400w
Max. Continuous Power RMS150w
Max. Power SPL @ 1 M114.0 dB
Transformer Options120 W 25 / 70.7 / 100 Volt Applications
Transducer - Low Frequency Driver3″ Polypropylene
Transducer - High Frequency Driver1" Titanium Dome
ColorsGreen or Black
Grille - materialStainless Steel
Tweeter - part1″ Aluminum Dome
InputsNeutrix
Accessories Optional120 W Transformer, Tap Switch
Regulatory - RoHSapproved
Applications

Designed for outdoor use in large public spaces, the XT-Spyke is ideal for PA and sound reinforcement applications. Its near-field to far-field transition occurs at only 3 meters (about 10’) from the speaker, maintaining a constant directivity of 91 x 50 degrees throughout the coverage area. The XT-Spyke was designed for use in transportation platforms, airports, houses of worship, auditoriums and other public gathering spaces.