Accessories

Rockustics Accessories

Transformers

15 Watt XFMR

15 Watt transformer for 25V, 70.7V and 100V operation. 4 ohm or 8 ohm impredence.

Optional with the following speaker : PunkRock

65 Watt XFMR

64 Watt transformer for 25V, 70.7V and 100V operation. 4 Ohm impedance. Tap settings: 64, 32, 16, 8, 4 Watts (except for 100V operations).

Optional with the following speakers: Rocky III, EconoRock, Rocquette, Pavarocci, OctoRock, Rocky Jr., Garden Series OmniPlanter 6.5, Garden Series OmniPlanter 8.0, SurroundStone 5, and SurroundStone 8.

120 Watt XFMR

120 Watt transformer for 25V, 70.7V, and 100V operation. 4 Ohm or 8 Ohm impredance. Tap settings: 64, 32, 16, 8, 4 Watts (except for 100V operation).

Optional with the following speakers: StoneHenge II, Hillside, XT-PowerRock, and PunkSub.

image of RSB1 Security bracket

RSB1 Security Brackets

Protect your Rockustics investment with RSB1 security brackets. These brackets attach to the bottom of a Rockustics rock and provide a bolt hole that can be used to tether the rock with a cable or with a 3/8” bolt. The bracket can be easily adjusted to allow the rock to sit flat on a variety of surfaces, and is thin enough that it will not affect the look or performance of the speaker. RSB1 brackets will only work on Rockustics Rock Series and Subwoofer Series speakers – they cannot be used to secure Garden Series (planters and OmniPlanters). Either one or two brackets can be requested at time of the order of your Rockustics speaker. Please note that the brackets will only deter theft; they will not make the rocks “theft proof”.

The bracket is made from 16 gauge 304 grade stainless steel and will be attached to the rocks with stainless steel Torx pin security screws. A single unit will provide a basic level of security. Adding an additional bracket and bolting both brackets to the substrate the rock sits on will provide the greatest level of theft protection. The brackets will need to be ordered at the same time as the speakers in order for us to install them on the rocks. They will be a separate line item on the price list and should be ordered this way as well. Part number for these brackets is the RSB1.

Note – this bracket will only work on the “cast” rock speaker models. They do not work on the Omniplanter or Planter series speakers.




Large Product Image
Large Product Image (installed-top view)
Large Product Image (installed-side view)
Large Product Image (installed-bottom view)